leema-acoustics STREAM III, Handbook, Page: 16 / 23

Disc repeat modes
STREAM III
16
To enable these various modes, an edit menu is used to select the appropriate setting.
To enter the edit mode, with the unit stopped, press the left & right buttons simultaneously. The LIPS modes may now be
cycled through by repeatedly pressing the left or right button. If the buttons are not pressed for a few seconds, the edit mode
is exited and normal operation is resumed.
The modes are displayed in the display as follows:
Disc repeat modes
Stream has the ability to repeat tracks or complete discs as required. To enable the repeat modes, an edit menu is used to
select the appropriate setting. To enter the edit mode, with the unit stopped, press the up & down buttons simultaneously. The
repeat modes may now be cycled through by repeatedly pressing the up or down button. If the buttons are not pressed for a
few seconds, the edit mode is exited and normal operation is resumed.
The repeat modes are displayed as follows:
NORM - Normal Play, SHUF - Shuffle All, SRPT - Shuffle Repeat All, RDSC - Repeat Disc and RSNG - Repeat Song.
OFF This is the default setting and should be used when the player is being used on its own as a normal player.
SLAV LIPS slave mode. This allows the player to be remotely controlled via a LIPS interface unit.
TUC1 Master mode to control a Leema Tucana MKI.
TUC2B Master mode to control a Leema Tucana MKII - Stream III connected to the Balanced input. (RCA to XLR cable)
TUC2R Master mode to control a Leema Tucana MKII - Stream III connected to the RCA CD input.
HYDR
Master mode to control a Leema Hydra power amplifier.
PXIS Master mode to control a Leema Pyxis preamplifier.
PULS Master mode to control a Leema Pulse MKI.
PUL3 Master mode to control a Leema Pulse MKIII. Note: Pulse MKII was never produced.