leema-acoustics Pulse III, Handbook, Page: 18 / 20

Audio Specifications
Power Output: 8 ohms: 80 Watts RMS per channel, 4 ohms: 150 Watts RMS per channel
Minimum load impedance: 4 ohms.
Output Current: greater than +/- 12 Amps
Frequency re0/-3dB @ 1W: 5Hz - 80KHz
Noise (A weighted, volume control minimum): -98dBm
Signal to Noise ratio (A weighted, ref: 150 Watts RMS 4 ohms): -102dB
THD (10 Watts RMS 4 ohms, 1KHz): 0.008%
THD (Max output before clipping, 4 ohms, 1KHz): 0.008%
Maximum DC offset: +/- 15mV
Output Impedance: 0.04 ohms Damping Factor (8 ohms): 200
Sensitivity for Moving magnet input: 4mV RMS, for Moving coil input: 500uV RMS
Sensitivity for maximum output (CD input): 565mV RMS
Sensitivity for maximum output (other inputs): 311mV RMS
RIAA accuracy: +/- 0.2dB 20Hz-20KHz
DAC: 24bit/192kHz with low jitter receiver. USB: 16bit/48kHz Burr-Brown CODEC
Specifications subject to change without notice.
WEEE Scheme
Audio Specifications
PULSE III
16
Disposal of Electronic Equipment in the European Union and other countries with collection procedures:
The wheelie bin symbol on this product indicates that it shall not be treated as household waste. It should be
disposed of via a collection point for the recycling of electrical and electronic equipment. Leema is fully
registered under WEEE/HK 0757 ZX