6
7.
Attention
1.
If need to clean the sensor, please use a soft cloth with a little alcohol to wipe it after you cut off the
power.
2.
This product is just for indoor use.
3.
Replace the battery timely on low battery warning to ensure the detector works properly. Please remove
the battery and safe keeping, if you don’t use this product for a long time.
4.
This device can be mounted on the wall only, it cannot be installed on the ceiling.
5.
The reference range template of PIR detection is tested at the indoor temperature (the range is 20
℃～
25
℃
)
，
the target of the test is 77kg
±
10kg weight and 1.71m
±
0.3m height, the target of the test across
movement speed is 4m/s
±
0.15m/s.
6.
In order to prevent the PIR sensor’s abnormal fault, please don’t mounting and operating sensor in the
bellow conditions,
Firstly, product mounting should prevent installed in the air flow environment such as in front of the
door, window, heater, air conditioner and so on.
Secondly, the PIR detection area should not be shielded by other screen.
Thirdly, if the operating temperature range is out of the defined range of product specification may result
in some product faults, which is not in the technique commitment of manufacturer.
Fourthly, this product has mot pet immunity function, so when some animals go through in front of the
product may trigger PIR function reported.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
