Leedarson HDA11FWB, Quick Start Manual

Page: 6 / 8

Step 4:
Follow the instructions on App.
LED Indicator
Under normal working state. LED indicator is solid green— turn on or dimming, LED
indicator is off —Turn off.
Status Behavior
Green and Orange
scrolling blinking To be configured status.
Quick Blinking Orange Connecting to the network
Solid Green
Connected to the network
The smart dimmer is turned on or dimming
Solid Red Connected failed.
Off The smart dimmer is turned off
The smart dimmer is not configured
Triple Blink Orange When the countdown starts, triple blink orange, and light on
or off LED indicator according to the actual situation
Connect to the network
Status Behavior
To be configured status
LED indicator green and orange scrolling
blinking.
Remark: Powering on switch, is ready to
start switch network configuration
Connecting to the network LED indicator quick blinking orange
statue.
Connected to the network LED indicator keeps in green status for
3s and then turns off. If switch is not
turned on.
Connected failed.
LED indicator keeps in red status for 3s
and then turns off.
Remark: while connected failed, led
indicator turn off, to reset the smart
switch to factory settings.
Factory default (reset) Hold “D im-up ” and “Dim -down ” button
for a total 5 seconds, and LED indicator
keeps in red status, release the button
and it will reset. After a total 5 seconds,
switch get into to be configured statue.