Common Operations
Initial settings
• The system will be turned on after the power be connected.
• The speaker and the subwoofer have already been paired with each other before shipment, so
they will work once turned on.
• Connect the speaker to the TV via HDMI (ARC)
If HDMI (ARC) is available on your TV, you can use an HDMI cable to connect the speaker to the
TV for a better audio experience.
System operations
1. Surround sound mode
Press the Le button on the remote control during playback to turn on/off surround sound effects.
2. Adjust volume
Press the /- buttons on the remote control to turn up/down the volume.
• Press and hold the Le button for 2 seconds to mute.
• To unmute, press either or Volume -, or press the Le button for 2 seconds again.
• When adjusting the volume, the indicator corresponding to the signal source will blink
accordingly. When the maximum or minimum volume is reached, the indicator will stop blinking.
3. Play audio via Bluetooth
Connect the speaker to an external Bluetooth device (such as iPad/iPhone/Android phone) via
Bluetooth and enjoy music on the connected device using the speaker.
• Press the Bluetooth button on the speaker or remote control. During Bluetooth pairing, the
Bluetooth indicator on the speaker will blink white.
• Turn on Bluetooth on the external device, and search for and select "LHT-V16S".
• When the BT indicator on the speaker glows white, the connection is established.
4. Auto standby mode
If the system stays idle for and receives no signal in 30 minutes, it will automatically enter the
standby mode.
5. Pair the subwoofer
When you turn on the system, the speaker and the subwoofer will pair with each other for a
wireless connection. If the subwoofer makes no sound, you can manually pair the system.
• Press the Link button on the back of the subwoofer for at least 3 seconds until the indicator
on its front blinks white.
• Press and hold both the Bluetooth button and the Source button on the speaker for at least
2 seconds until all the 6 indicators on the speaker blink one by one. When the speaker is
successfully connected to the subwoofer, the 6 indicators will glow for 3 seconds. If the pairing
fails, the 6 indicators will blink for 3 times, and you need to repeat the aforementioned steps.
