3
INSTRUCTIONS FOR USE
• Hair should be clean, dry and tangle free before using the straigteners.
• Plug the appliance into a suitable mains socket.
• Ensure the voltage being used is the correct voltage for this straigteners.
• Switch the straighteners on by pressing the on/off switch, the temperature
display will be illuminated.
• Set the required temperature using the ^ / v buttons. The display informs the
following:
• The indicator flashes - the straighteners are warming up.
• The indicator stops flashing – straighteners have reached the desired
temperature.
• The straighteners will reach operating temperature after just a few seconds.
• Allow the straighteners to cool down completely before cleaning or storage.
LEE’S TOP TIPS
• Before using the straighteners I recommend using my ARGANOIL® from
Morocco HEAT DEFENCE SPRAY.
• Make sure the hair is dry and there are no knots or tangles within the hair to
avoid any snagging.
• Set the desired temperature using the ^ / v buttons.
• Section the hair into manageable sections.
• Starting from the roots, put the hair between the straightener plates.
• Clamp the straightener plates and pull them slowly from the roots to the tips
of the hair.
• Hold the plates firmly together to ensure the best results.
• Repeat until you have straightened the whole head.
• After straightening, let your hair cool down and then comb it out.
• When finished use my ARGANOIL® MIRACLE SHINE SPRAY for the perfect
finishing touch.
