7
INSTRUCTIONS FOR USE
• Blow dry your hair and detangle with a large tooth comb from root to tip
before using the wand.
• Plug the wand into a suitable mains socket.
• Ensure the voltage being used is the correct voltage for this wand.
• The indicator light will illuminate when the unit is switched on.
• Leave the wand on its safety stand and rest on a smooth, flat heat resistant surface.
• Wait for a few minutes to allow the wand to reach temperature.
• To turn off the wand, slide the on/off button to the ‘0’ position and allow to
cool on a flat heat resistant surface.
• Allow the wand to cool down completely before storing away.
• Take extra care when using the wand as it can get very hot.
LEE’S HOT TIPS
• Before using my CoCo LoCo WONDERBaLL Wand, I recommend using my
ORiGiNAL HeAT PrOTEcTION SHiNE MiST.
• Make sure your hair is dry and there are no knots or tangles within the hair to
avoid any snagging.
• Section your hair into manageable sections.
• Hold your CoCo LoCo WONDERbALL Wand pointing downwards.
For tousled beachy waves
• Take a section roughly 4cm wide and wrap it over the barrel.
• Hold in place for 7 - 10 seconds and release.
• Be careful not to let the CoCo LoCo WONDERbALL Wand touch the scalp.
• Repeat these steps around the whole of your head.
For defined CurLs
• Take a smaller section around 2cm wide and wrap it in between the barrel.
• Repeat around the whole of your head.
• Shake your hair out with your fingers to break up the waves or brush the curls
out with a my SQueaky CLEAN PaDDle brush for a retro look.
• Allow your hair to cool.
• To hold your style use my CoCo LoCo CoConut HAiRSPRaY.
