The lamp case
Connect the battery to the lamp case. Be careful to fit the
white markings on the contacts to each other; if they are
incorrectly fitted and forced together the contact pins
might break.
Right
Wrong
The switch is placed at the bottom of the lamp case. Light
the lamp by pressing the switch until the lamp turns on
(1-3s). The lamp starts on the lowest effect, default at 20 %,
use short clicks to up the effect. Turn it off by pressing the
switch until it turns off.
The lamp has a heat protection; if the lamp becomes
warmer than 75 ° C it slowly decreases the amount of
light in small steps. When the temperature drops it
automatically increases the light again. If you use the
lamp indoors it will adjust the light after the lamp
temperature. For outdoor use, the light needs to be in
motion to give 100%. There is an emergency built-in, if the
lamp has been covered or for any other reason reached
95 ° C, the lamp turns off completely.
The lamp case can easily be removed from the headgear
by lightly press the top part of the attachment plate and
simultaneously pull the lamp upwards.
The lamp is water resistant, but should not be used
underwater.
Summary of Contents for Kaa 2 000 wide
Page 1: ...Kaa 2 000 wide English...
