www.ledvance.com.au
C10449058
G11080849
2019-09-04
LEDVANCE Pty Ltd
ABN 34 050 103 181
Suite 2.1A
394 Lane Cove Road
Macquarie Park NSW 2113,
Australia
Ph +61 29481 8399 / 1300 467 726
www.ledvance.com.au
Basic Malfunctions Detection and Troubleshooting
a. If the load cannot work:
a) Please check the power and the load.
b) Please check if the indicator light is turned on after sensing or not? If yes, please check the load.
c) If the indicator light does not turn on after sensing, please check if the working light corresponds to the
ambient light.
d) Please check if the working voltage corresponds to the power source.
b. The sensitivity is poor:
a) Please check if in front of the detection window there are any obstacles that disturb the signals receiving.
b) Please check the ambient temperature.
c) Please check if the signals source is in the detection fields.
d) Please check if the installation height is within the indicated height level.
e) e. Please check if the moving orientation is correct.
c. The sensor can’t turn off the load automatically:
a) Please check if there are continual signals in the detection fields.
b) Please check if the time delay is set to the longest.
c) Please check if the power input is following the instruction.
d) Please check if the environment temperature changes a lot due to its installation location is very close to air
conditioners or central heater.
Warnings:
a. The product should be installed by licensed electricians.
b. The product should not be installed on any moving objects or surface.
c. Please do not put any obstacles or unrest objects in front of the detection window to influence the detection.
d. Please do not put the sensor near the area which is having tremendous changes of temperature such as air
conditioner or central heater.
e. Please don’t open the case after installation.
11080849 MS-SV-INF-CS-360-230V-IP20 UI LEDV v4.indd 4
4/9/2019 4:50 PM
