05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit during ope-
ration and keep it out of reach of children or animals. This product is not a toy, LED lights are extremely
bright and looking directly at the light source during operation can lead to serious eye damage. Any
other use of the device than described in the manual may damage the product or cause danger to the
user, e.g. due to a short circuit, fire or electric shock. The safety instructions must be observed at all
times.
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety instructions of the
device. Furthermore, we are not liable for consequential damage, damage to objects or persons resulting
from failure to observe the safety instructions and improper use/handling of the device due to wear and
tear. Product design and specifications are subject to change without notice. All logos and trade names
are registered trademarks of their respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating instructions
are part of the product, they contain important information on the commissioning and handling of the
device. Keep all enclosed operating instructions for future reference. If the device is sold or passed on
to third parties, you are obliged to pass on the operating instructions as these are lawfully part of the
product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the product. If damaged,
it must not be put into operation.
1.
It is advisable to first fully charge the work light completely before the first use, using
the supplied charging cable
2.
When the work light is fully charged (5 hours) all indicator LEDs on the rear will light up.
3.
To dim the light, hold down the on / off button (stepless dimming).
4.
This product has a powerbank function (USB port on the back of the product).
Attention
- The charging cable is not suitable for „rough (outdoor) use“. At construction sites for example, this
product can only be used without a charging cable.
- After using the work lamp, it must be stored indoors. Avoid storage with extremely high or low tempe-
ratures, this will affect the battery life of the product.
- When the working light is stored longterm (>6 months), charge it regularly. This will prevent deep
discharge of the battery. As this is normal for Lithium-Ion batteries, a deep discharge does not form
grounds for reclamation.
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condition of the
product and safe operation.
LED’s
work
FILE-NAME: SHADA Main Brands - 2019012501 - Two different sizes for Packing artwork - Workfi le with fonts.indd
Printfi le created on: 20191111 14:04 - Design: WAPC
5
