Power supply Cable connector
LED strip
PIR sensor
Sensor area
1
2
4
3
Adapting / trimming the LED strip
Attention! Before you trim the LED strip, make sure that you have disconnected the strip
from the controller.
The flexible LED strip can be trimmed every 10cm. The correct spot for trimming, is
indicated with the symbol of a pair of scissors.
Installation description
1.
Make the stick region clean, ensure the places are dust and oil free, release the paper
from the 3M tape and stick the strips.
2.
Use the cable connector to connect the PIR sensor with the LED strip.
3.
Fix the PIR sensor on the side of the bed and unblock the sensor.
4.
Connect the driver with the cable connector and plug the driver into the socket.
fi le name:SHADA Main Brands - 2017051001 - Two different sizes for Packing artwork.indd - - Printfi le created on: Print fi le created on: 20170920 08:55 - Design: WAPC
401637-MAN-ML-2017092001-SHA.indd 3
20-9-2017 08:55:06
