www.prolight.co.uk
Stage Par CZ 100
User Manual
8
Operating instructions
No DMX signal:
To change how the unit responds when the DMX signal is lost, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the rear of the unit to show
dNSt
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
LAst
(Hold the last DMX
command) or
bLNd
(Blackout). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimming curves:
To access the dimming curve setting, press the
“MENU”
button on the front of the unit to show
CUrU
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
between
LIN
(Linear),
SqU
(Square),
ISqU
(Inverse square) or
SCUr
(S-Curve).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimming profile:
To access the LED dimming profile setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the rear of the unit to show
ProF
on the LED display. Now press the
“ENTER”
button and
use the
“UP”
and
“DOWN”
buttons to choose between
HALO
(Halogen) or
LEd
(LED). Press the
“ENTER”
button to confirm the setting. To exit out of any of the above options, press the
“MENU”
button.
LED backlight:
To access the LED backlight setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on
the rear of the unit to show
LEd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
ON
or
OfF
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display invert setting:
To access the display invert setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on
the rear of the unit to show
dIsp
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
dISP
or
dSIP
. Press the
“ENTER”
button to confirm the
setting. To exit out of any of the above options, press the
“MENU”
button.
Manual mode:
To access manual mode, press the
“MENU”
button on the front of the unit to show
NANU
on the LED
display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
UHIt
(White dimmer) or
StrO
(Strobe). Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
000
~
255
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
