background image

 LEDJ SPECTRA BANK 4, 6, 8 

 

 

 

                                                            SAFETY 

 

WARNING 
 

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY 
                                        BEFORE YOUR INITIAL START-UP! 
 
 
 
 

                                

 

                                 

CAUTION! 

 

     Keep this equipment away from rain, 

 Moisture and liquids. 

 

 
 
 
 

SAFETY INSTRUCTIONS 

 
Every person involved with the installation, operation & maintenance of this  
equipment should: 

Be competent 

Follow the instructions of this manual 

 

  

         

 

 

CAUTION! TAKE CARE USING THIS EQUIPMENT! 

 HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!! 

 

 
 

Before your initial start-up, please make sure that there is no damage caused during  
transportation. Should there be any, consult your dealer and do not use the equipment. 

 

To maintain the equipment in good working condition and to ensure a safe operation, it is 
necessary for the user to follow the safety instructions and warning notes written in this 
manual. 

 

Please note that damages caused by user modifications to this equipment are not  
subject to warranty. 
 

 LEDJ SPECTRA BANK 4, 6, 8 

 

 

 

                                                            SAFETY 

 

Summary of Contents for Spectra Bank 4












Reviews: