background image

1a, RGBW colour mix mode

In this mode you can set the 5Q5 or 7Q5 to any colour and any brightness.

Press the 

“MODE”

 button to show 

“r- - -”

 with three digits after it. 

The 

“r”

 represents Red, 

“G” 

= Green, 

“b” =

 Blue, 

“U” 

= White and 

“F-0” 

= strobe. 

The three digits after it are the brightness 000 to 255 or in 

“F-0”

 they are the strobe speed.

Examples: If you set “r”, “G”, “b” and “U” all to zero, your unit will have no LEDs showing (blackout).

                  If you set “r” to 255 and “G”, “b” and “U” to zero your unit will be 100% Red.

1b, RGBA colour mix mode

In this mode you can set the 7Q5 RGBA to any colour and any brightness.

Press the 

“MODE”

 button to show 

“r- - -”

 with three digits after it. 

The 

“r”

 represents Red, 

“G” 

= Green, 

“b” =

 Blue, 

“A” 

= Amber and 

“F-0” 

= strobe. 

The three digits after it are the brightness 000 to 255 or in 

“F-0”

 they are the strobe speed.

Examples: If you set “r”, “G”, “b” and “A” all to zero, your unit will have no LEDs showing (blackout).

                  If you set “r” to 255 and “G”, “b” and “A” to zero your unit will be 100% Red.

2 Built-in programme mode

Press the 

“MODE”

 button to show 

“Pr00”

 on the LED display. Press the 

“ENTER”

 button and use 

the  

“UP”

 and 

“DOWN”

 buttons to scroll through the 21 built-in programmes. Now press the 

the 

“ENTER”

 button again to change the speed from SP-0 to SP-9 using the 

“UP”

 and 

“DOWN”

 

buttons. Now press the 

ENTER”

 button a final time to add strobe from F-0 to F-9. 

Built-in programme list:

Pr00 = Colour fade/colour change

Pr01 - Pr15 = Static colours (15 in total)

Pr16 = 15 colour change

Pr17 = 15 colour fade

Pr18 = 4 colour change

Pr19 = 4 colour fade

Pr20 = 3 colour change

3, Slave mode

Link the units together using a 3-pin DMX cable, then press the 

MODE

 button to select one of the 

above modes. On the Slave units press the mode button until the LED display shows 

“SLAV”. 

The 

Slave units will then follow in sequence with the Master unit.

4, Sound active mode

Press the “

MODE”

 button until the LED display shows 

“SU00”

, then press the 

“ENTER”

 button to set the desired sensitivity level using the 

“UP”

 and 

“DOWN”

 buttons.

The sound sensitivity levels are from 00-99 (00 = low, 99 = high)

 LEDJ Slimline 5Q5, 7Q5   

 

 

 

                                                    Operations

Summary of Contents for Slimline 5Q5













Reviews: