background image

www.prolight.co.uk

Rapid QB1 HEX IP

  

User Manual

8

Operating instructions

Wireless DMX operation:

To operate the fixture in wireless DMX you will need to connect the fixture to a W-DMX compatible  
wireless DMX Transmitter. Firstly clear the fixtures wireless DMX memory by following the instructions 
below. To pair the fixture and transmitter make sure the wireless DMX indicator is off. 
To turn wireless DMX on, press the 

“MENU”

 button to show 

“Wireless DMX”

 on the OLED display. Now 

use the 

“UP”

 and 

“DOWN”

 buttons to select 

“On”

.  

To put the unit into Wireless DMX receive mode, press the 

“ENTER”

 button again and use the 

“UP”

 and 

“DOWN”

 buttons to select 

“Receive”

. Press the 

“ENTER”

 button to confirm the setting.   

Press the pair button on the transmitter. The wireless DMX indicator will start flashing fast. Once the pair 
is successful the indicator will turn solid yellow.
To turn wireless DMX off, press the 

“MENU”

 button to show 

“Wireless DMX”

 on the OLED display. Now 

use the 

“UP”

 and 

“DOWN”

 buttons to select 

“Off”

. Press the 

“ENTER”

 button to confirm the setting.  

To exit out of any of the above options, press the 

“MENU”

 button.

To link multiple Rapid QB1 via wireless master/slave see 

Wireless master/slave operation

.

Clear wireless DMX memory:

To clear the wireless DMX memory, press the 

“MENU”

 button to show 

“Wireless DMX”

 on the OLED 

display. Now use the 

“UP”

 and 

“DOWN”

 buttons to select 

“ClearAll”

 (Transmit mode) or 

“Clear”

  

(Receive mode). Press the 

“ENTER”

 button to erase the wireless DMX memory. 

 

The Wireless DMX indicator will go off.  To exit out of any of the above options, press the 

“MENU”

 button.

Please note: When the fixture is in Wireless DMX transmit mode the wireless DMX memory of the 
Transmitter unit and all receiving units will be cleared (ClearAll). When in Wireless DMX receive mode 
the wireless DMX memory of that one receiving unit will be cleared (Clear).

Wireless DMX indicator information:

When the Wireless DMX indicator LED is illuminated, the fixture is paired.
When the Wireless DMX indicator LED is flashing fast, the fixtures settings from the last pair are saved 
but the fixture isn’t paired with the transmitter.
When the Wireless DMX indicator LED is flashing slow, the fixtures is paired with the transmitter but isn’t 
receiving signal.
When the Wireless DMX indicator LED is off, the fixtures doesn’t have any remembered wireless DMX 
settings and isn’t paired with a transmitter.

Summary of Contents for Rapid QB1 HEX IP

















Reviews: