www.prolight.co.uk
Q Colour HEX
User Manual
5
Operating instructions
Main Menu
Sub Menu
Options/Values (Default Settings in Bold)
Description
DMX Addr
Addr:
001
-512
DMX Address Setting
CH Mode
3CH (3 channel mode)
DMX Channel Setting
4CH (4 channel mode)
5CH (5 channel mode)
6CH (6 channel mode)
8CH (8 channel mode)
11CH (11 channel mode)
Master
On
Master Mode
Off
Slave
Slave 1
Slave Mode
Slave 2
ProgMode
Progm01-13
Sped=000-255
Built-in Programs
ColoMode
Red
000-255
Colour Mix Mode
Green
000-255
Blue
000-255
White
000-255
Amber
000-255
UV
000-255
ColMacro
Colour01-Colour64
Colour Macros
MastDim
000-
255
Master Dimmer
Sound
On
Sound Mode (This takes priority
over the program speed when on)
Off
Sense
001-100
(80)
Sound Sensitivity Setting
DMXFail
BlackOut
DMX Fail Setting
Hold
Program
DimCurve
Linear
Dimming Curve Settings
Square
InSquare
S-curve
Control Panel Menu:
The LCD control panel situated on the rear of the fixture allows the user to access the menu system to
adjust the fixtures settings. When the unit has been powered on it will show
“Update wait...”
followed
by
“QColour HEX”
. The fixture will then return to its home screen. To access the main menu press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons until the menu required is highlighted.
Pressing the
“ENTER”
button on one of these options allows you to access the sub menu where
you use the
“UP”
and
“DOWN”
buttons to select the option/value required.
Once the option/value has been selected press the
“ENTER”
button once more to confirm the setting.
To exit out of any menus, press and hold the
“MENU”
button.