www.prolight.co.uk
Mini Pix 4 Batten
User Manual
7
Master/slave mode
To set the master unit, press the
“MODE”
button on the rear of the master unit then select your
desired program (sound active, auto, static colour or one of the built-in programs). To set the other
units in slave mode, press the
“MODE”
button on the rear of the unit to show
“SLAVE MODE”
on the
LED display and press the
“ENTER”
button to confirm the setting. The unit will now run in sequence
with the master unit. To exit out of any of the above options, press the
“MODE”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the
“MODE”
button on the rear of the unit to show
“SOUND MODE”
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the sound sensitivity level and press the
“ENTER”
button to confirm the setting.
“SENS” 00 - 31 (00 = low, 31 = high)
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the frequency level
and press the
“ENTER”
button to confirm the setting.
“FQN” 01 - 99 (01 = low, 99 = high)
To exit out of any of the above options, press the
“MODE”
button.
Auto run mode:
To access the auto run mode, press the
“MODE”
button to show
“AUTO RUN”
on the rear of the unit.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the frequency level and
press the
“ENTER”
button to confirm the setting.
“FQN” 01 - 99 (01 = low, 99 = high)
- The frequency level adjusts how many times the program
repeats before moving to the next program.
To exit out of any of the above options, press the
“MODE”
button.
Note: In this mode, it will run 14 built-in programs in a continuous loop.
Built-in programs mode
To access the built-in programs mode, press the
“MODE”
button on the rear of the unit to show
“01.STATIC”
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select between the 14 built-in programs. Now press the
“ENTER”
button to select the desired speed
and adjust by using the and
“DOWN”
buttons.
Speed values: 01 - 99 (00 = slow, 99 = fast)
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
See next page for built-in programs chart.
Operating instructions
