www.prolight.co.uk
TPix Panel
User Manual
8
Subnet Mask setting :
To access the Subnet Mask setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the rear of the unit to show
“Network Settings”
on the LCD display. Now press the
“ENTER”
button
and use the
“UP”
and
“DOWN”
buttons to select
“Subnet Mask”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the part of the Subnet mask you would like to change indicated by
a
“[”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to adjust the selected part of the
Subnet mask you have chosen. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Net SubNet Universe setting:
To access the Net SubNet Universe setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the rear of the unit to show
“Network Settings”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“Net SubNet Universe”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the part of the Net SubNet Universe you would
like to change indicated by a
“[ ]”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
adjust the selected part of the Net SubNet Universe you have chosen.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the rear of
the unit to select one of the Auto Programs.
To set the other units in slave mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the rear of the unit to show
“Slave Mode”
on the LCD display. Now press the
“ENTER”
button and use
the
“UP”
and
“DOWN”
buttons to set slave mode on/off
“Slave Mode [YES]”
or
“Slave Mode [NO]”
.
Press the
“ENTER”
button to confirm the setting.
Operating instructions
