1, DMX Mode
To enter the DMX mode, press the
“MENU”
button to show
“SET DMX ADDRESS”
on the LCD display. Now
press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the DMX address from 001-512.
Now press the
“ENTER”
button again to confirm the setting.
2, DMX channel selection
To choose a DMX channel mode press the
“MENU”
button to show
“SET RUN CHANNEL”
on the LCD
display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select one of the channel
modes: 3, 7, 10, 12 or 16 channel modes.
When you are happy with your choice, press the
“ENTER”
button to confirm it.
3, Built-in sound active programmes mode
To enter the built-in sound active programmes mode, press the
“MENU”
button to show
“SET RUN MODE”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to scroll through
the 14 built-in sound active programmes, 0 - 13.
To increse or decrease the sensitivity levels, simply use the sensitivity control on the rear of the unit.
4, Master/slave mode
To enter the master/slave mode, press the
“MENU”
button to show
“SET MAST MODE”
on the LCD display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“MASTER”
,
“SLAVE”
or
“OFF”.
Master = When the unit is set as the master this unit should be the first in line of the set up.
Slave = When the unit is set as the slave, the unit will foll,ow in sequence with the master unit.
Off = When the unit is set to the off option the unit will blackout. To turn back on, simply set it back to
the master option.
DMX charts:
3CH
LEDJ Light Brick
Operation
Channel
Value
Function
1
000-255
Red 0-100%
2
000-255
Green 0-100%
3
000-255
Blue 0-100%
