Setup
Operating Instructions
The Stage Color 24 Tri is a DMX-512 controllable unit made up of high efficiency and Ultra Bright
Tri-colour LEDs and will operate in stand alone, master/slave, sound activated or DMX control
modes.
MB-2 Footswitch operation (optional)
To operate the Stage Colour 24 Tri via the (optional) LEDJ MB-2 foot controller (LEDJ124),
ensure that the Stage Colour 24 Tri has been set into
“SLAVE MODE”
, Now connect the foot con-
troller into the 5-pin footswitch socket of the rear of the unit.
HBR-1D operation (optional)
To operate the Stage Colour 24 Tri via the (optional) LEDJ HBR-1D controller (LEDJ123),
ensure that the Stage Colour 24 Tri has been set into
“SLAVE MODE”
, Now connect the controller
into the 3-pin XLR socket of the rear of the unit.
When using both of the HBR-1D and MB-2 controllers together please note that the MB-2
footswitch controller has to be plugged into HBR-1D controller not the fixture.
Note: Please follow the user manuals supplied with the optional MB-2 or HBR-1D controllers
for details of various operation modes.
STAGE COLOR 24 TRI
INTRODUCTION
Introduction
Features
• DMX channels: 21/18/12/9/6 selectable
• 24 x 3W Tri-colour LEDs
• Sound control via internal microphone
• 14 built-in programmes
• Master/Slave functions
• Auto run mode
• Consumption: 100W
• Beam 25 degrees
Overview
3.
POWER SUPPLY
ENTER
MODE
LCD DISPLAY
UP
DOWN