Ledj HEX Par 9 LEDJ226, User Manual

Page: 6 / 12

www.prolight.co.uk HEX Par 9 User Manual
6
Master/Slave mode:
To access the Master/Slave mode, press the mode button until the display shows
SLNd
and press the “ENTER” button. Use the “UP” and “DOWN” buttons to select
NaSt
(master)
or
SLAV
(slave) and then press “ENTER” to confirm your selection.
Show mode:
To access the colour change mode, press the “MODE” button until the display shows
ShNd
and press the “ENTER” button. Use the “UP” and “DOWN” buttons to select the desired colour
change mode (see below) and then press “ENTER” to confirm your selection.
CoLo
(Static Colour) press “ENTER” and the display will show
CoL1
, press “ENTER” again and the
display will show CoL. Use the “UP” and “DOWN” buttons to select the desired colour
CoL1
-
Co63
and then press “ENTER” to confirm your selection. You can now set the dimmer by pressing the “UP”
button followed by the “ENTER” button, now use the “UP” and “DOWN” buttons to select the desired
brightness
d000
-
d255
and then press “ENTER” to confirm your selection.
JuNP
(colour change) press
“ENTER”
and the display will show
Sp00
, press
“ENTER”
again and
use the
“UP”
and
“DOWN”
buttons to select the desired colour change speed SP00-SP99 and then
press
“ENTER”
to confirm your selection. You can now set the dimmer by pressing the
“UP”
button
followed by the
“ENTER”
button, now use the
“UP”
and
“DOWN”
buttons to select the desired brightness
d000
-
d255
and then press
“ENTER”
to confirm your selection.
F@de
(colour fade) press “ENTER” and the display will show
Sp00
, press “ENTER” again and
use the “UP” and “DOWN” buttons to select the desired colour fade speed
SP00
-
SP99
and then
press “ENTER” to confirm your selection. You can now set the dimmer by pressing the “UP” button
followed by the “ENTER” button, now use the “UP” and “DOWN” buttons to select the desired brightness
d000
-
d255
and then press “ENTER” to confirm your selection.
RGB colour mixing:
To access the colour mixing mode, press the “MODE” button until the display shows baLa and press
the “ENTER” button. Use the “UP” and “DOWN” buttons to select the desired colour
red
,
Gree
,
bLue
and then press “ENTER” to confirm your selection. Use the “UP” and “DOWN” buttons to select
the colour level
50
-
255
then press “ENTER” to confirm your selection.