LEDJ Eco LED 64
CONTROL OPTIONS
Daisy Chain Connection
1) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin
connector of the first fixture
2) Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
Proceed to connect from the output as stated above to the input of the following fixture
and so on.
DMX Control Mode
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently. The Eco LED 64 uses 6 channels of control.
Enable the DMX control by setting dip switch No: 10 to the
ON
position. Use dip switches 1 – 9 to
address each fixture accordingly.
Setting the DMX address
The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start
address” from 1- 511. A fixture requiring one or more channels for control begins to read the data
on the channel indicated by the start address. For example, a fixture that occupies or uses 7
channels of DMX and was addressed to start on DMX channel 100, would read data from
channels: 100,101,102,103,104,105 and 106. Choose a start address so that the channels used
do not overlap. E.g. the next unit in the chain starts at 107.
POWER
IN
AC
LINE
INPUT FROM DMX CONTROLLER
(OPTIONAL)
Use 3 pin XLR DMX cable
Continue
FUSE
1A
POWER
IN
FUSE
1A
POWER
IN
FUSE
1A
POWER
IN
FUSE
1A
ON
ON
ON
ON
IN
OUT
IN
OUT
IN
OUT
IN
OUT
