www.prolight.co.uk
Display Floor
User Manual
5
Installation:
The Display Floor is designed to be installed on dry, stable surfaces. All installations must feature
complete edge trim systems to reduce the risk of any trip hazards. The units can be used together with
the foot plates for alignment.
The Floors SD controller (Order code: LEDJ462) has 8 RJ45 zone connections. Each one of these
connections can control a maximum of 10 panels per zone. For configurations where extra zones are
required an extra controller/slave controller will be needed dependant on the application.
Please note: the Floor requires the SD controller (Order code: LEDJ462) to operate.
The Floor will not operate stand alone.
Installation
Dancefloor Size
(excluding edge trim)
Display Floor
Panels
0.5m Edge
Trim
1m Edge Trim
Corners
(1 x Left,
1 x Right)
IP Rated
Power Cable
IP rated signal
- RJ45 cable
Half Foot
Plate
Foot Plate
1 x 1m
4
0
0
4
2
2
4
1
1.5 x 1.5m
9
4
0
4
3
3
8
4
2 x 2m
16
0
4
4
4
4
12
9
2.5 x 2.5m
25
4
4
4
5
5
16
16
3 x 3m
36
0
8
4
6
6
20
25
3.5 x 3.5m
49
4
8
4
7
7
24
36
4 x 4m
64
0
12
4
8
8
28
49
4.5 x 4.5m
81
4
12
4
9
9
32
64
5 x 5m
100
0
16
4
10
10
36
81
IMPORTANT:
Care should be taken at all times to ensure the Display Floor is free of any moisture or
spillages of any kind including liquid or powder substances. The Prolight Concepts Group accepts no
responsibility for trips, slips, falls or otherwise as a result of incorrect installation, sub-standard
maintenance or lack of cleaning the Display Floor including failure to clean up or remove any
substances that may cause a lack of friction on the surface of the Display Floor.
It is highly recommended that suitable footwear must be worn when walking or dancing on the
Display Floor. Certain types of footwear may not offer adequate friction and grip. Risk assessments
should be carried out when commissioning the Display Floor in any venue or installation.
