www.prolight.co.uk
Artisan 1200 WW Profile
User Manual
8
Operating instructions
Dimming curves:
To access the fixtures dimming curves, press the
“MENU”
button to show
“DIMCURVE”
on the LCD
display. Now use the
“UP”
and
“DOWN”
buttons on the rear of the unit to select between
“LINEAR”
,
“SQUARE”
,
“I-SQUARE”
and
“S-CURVE”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimming mode:
To access the fixtures dimming mode, press the
“MENU”
button to show
“DIMMODE”
on the LCD display.
Now use the
“UP”
and
“DOWN”
buttons on the rear of the unit to select between
“HALOGEN”
and
“LED”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
DMX fail setting:
To access the fixtures DMX fail setting, press the
“MENU”
button to show
“DMX FAIL”
on the LCD
display. Now use the
“UP”
and
“DOWN”
buttons on the rear of the unit to select between
“BLACKOUT”
,
(blacks out the fixture when signal is lost)
“HOLD”
(holds last DMX command) and
“STATIC”
(manual mode). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button on the master unit to select either the manual mode or
the fade in/out mode.
To set the other units in slave mode, press the
“MENU”
button on the slave unit to show
“SLAVE MODE”
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
IR setting:
To access the units IR setting, press
“MENU”
to show
“OTHER BLGT”
on the LCD display. Press the
“EN-
TER”
button to show
“OTHER IR”
on the LCD display and use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(IR receiver on) and
“OFF”
(IR receiver off).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Backlight setting:
To access the units backlight setting, press
“MENU”
to show
“OTHER BLGT”
on the LCD display. Use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(backlight on) and
“OFF”
(backlight goes off after
20 seconds). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
