ARCHI BAR 48
OPERATION MODES
Operation modes
Dimming mode:
To activate the unit in dimming mode, press the
“MODE”
button to show
“DIMMING”
on the LCD
screen. Now press the
“ENTER”
button to set the brightness of the LEDs by using the
“UP”
and
“DOWN”
buttons.
Press the
“ENTER”
button once for the Red LEDs, twice for Green LEDs, three for Blue LEDs
and four for the White LEDs. Each of the colours can be set from 00 - 99 by using the
“UP”
and
“DOWN”
buttons. Press the
“ENTER”
button once more to select the desired flash value and
adjust by using the
“UP”
and
“DOWN”
buttons.
Brightness levels 00-99 (00 = low, 99 = high), Flash values: 00 - 99 (00 = slow, 99 = fast)
Auto run mode:
To activate the unit in auto run mode, press the
“MODE”
button to show
“AUTO RUN”
on the
LCD screen. Now press the
“ENTER”
button to select the desired frequency level by using the
“UP”
and
“DOWN”
buttons.
“FQN” 01-99 (01 = low, 99 = high)
Note: In this mode, it will run 13 built-in programmes in a continious loop.
Slave mode:
To activate the unit in slave mode, first you must link multiple units together and press the
“MODE”
button to show
“SLAVE MODE”
on the LCD screen. Now on the master unit press the
“MODE”
button to select the desired mode and the slave units will now run in sequence with the
master unit.
Built-in programmes:
To activate the units built-in programmes, press the
“MODE”
button to show
“01.DIMMING”
on
the LCD screen. Press the
“ENTER”
button to choose between the 14 built-in programmes by
using the
“UP”
and
“DOWN”
buttons. Now press the
“ENTER”
button to select the desired speed
and adjust by using the
“UP”
and
“DOWN”
buttons. Press the
“ENTER”
button once more to
select the desired flash value and adjust by using the
“UP”
and
“DOWN”
buttons.
Speed values: 00 - 99 (00 = slow, 99 = fast), Flash values: 00 - 99 (00 = slow, 99 = fast)
For the 14 built-in programmes please see page 5.
DMX mode:
To activate the unit in DMX mode, press the
“MODE”
button to show
“DMX MODE”
on the LCD
screen. Press the
“ENTER”
button and select the desired DMX address setting by using the
“UP”
and
“DOWN”
buttons. Then to select one of the 3 DMX modes 19, 6 or 4 channel,
press the
“ENTER”
button again to choose the desired DMX mode by using the
“UP”
and
“DOWN”
buttons.
For the 4, 6, and 19 channel DMX address information please see pages 6 & 7.
NOTE: Once the desired settings have been selected in each of the above modes,
ALWAYS
confirm the settings by pressing the
“ENTER”
button.
4.
Summary of Contents for Archi BAR 48
Page 1: ...www prolight co uk Order code LEDJ222 USER MANUAL...
Page 11: ...10...
Page 12: ...www prolight co uk...
