www.prolight.co.uk
Intense 19T3 LED Slim Par
User Manual
5
Operating instructions
Built-in program mode:
To access the built-in program mode press
“MODE”
until the display shows
Pr.01
on the LED display.
Use the
“UP”
and
“DOWN”
buttons to select a program from
Pr.01
~
Pr.12
.
Press the
“ENTER”
button to confirm the setting.
To change the speed of the selected program press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to select any value from
SP00
~
SP99
. Press the
“ENTER”
button to confirm the
setting, then use the
“UP”
and
“DOWN”
buttons to select and value from
F500
~
F599
for the
strobe feature. Press the
“ENTER”
button to confirm the setting.
In
Pr.01
you are able to set a specific static colour. When in
Pr.01
press the
“ENTER”
button and
then use the
“UP”
and
“DOWN”
buttons to go through the static colours. Press the
“ENTER”
button to
confirm the setting, then use the
“UP”
and
“DOWN”
buttons to select and value from
F500
~
F599
for the strobe feature. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
Static colour mode:
To access the static colour mode press
“ENTER”
until
Colr
shows on the LED display.
Press the
“ENTER”
button and the LED display will show
r.225
. Now use the
“UP”
and
“DOWN”
buttons to select the brightness between
r.000
~
r.255
. Press the
“ENTER”
button and repeat
for green and blue.
Value: 000 - 255 (000 = low, 255 = high)
To exit out of any of the above options, press the
“MODE”
button.
Pr.01
Static colours
Pr.02
Multicolour fade 1
Pr.03
Multicolour fade 2
Pr.04
Multicolour fade in/out
Pr.05
7 colour change
Pr.06
Multicolour change
Pr.07
Circle chase 1
Pr.08
Circle chase 2
Pr.09
Colour circle change
Pr.10
Circle patterns 1
Pr.11
Circle patterns 2
Pr.12
Circle patterns 3
0.rgb
- White (RGB)
1.--r
- Red
2.-rg
- Orange
3.-rg
- Light Yellow
4.--g
- Green
5.-gb
- Cyan
6.--b
- Blue
7.-rb
- Violet
8.-rb
- Pink
9..-rg
- Yellow
-OFF
- Blackout
Programs:
Static colours:
