2
INTRODUCTION
Thank you for having chosen our LED lighting
Unpack the device, inside the box you should find:
The fixture device
One power cable
One XLR connection cable
This manual
Please check carefully that there is no damage caused by
transportation. Should there be any problems, consult your dealer
and don’t install this device.
DESCRIPTION
Features
600pcs 1W RGB LED, 600pcs 1.2W White LED
，
no ultraviolet
radiation.
More than 20,000 hours for the LED light source
200,000 lm for white version/ 70,000 lm for RGB version
120 degrees
3/6/9/13/14/25/50/57/72 DMX channels
16 Bit Dimmer
DMX Mode/Master-Slave mode/Pixel mode( can be used as a
wash with the output of 300W)
AC200-240V 50/60Hz 1500W
Diecasting heatsink with fans Control
With temperature sensor to extend the lamp's life
7000 Hz LED scan rate
⚫
L: 557 W: 146mm H:326.5 mm
⚫
IP65
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to
maintain this condition and to ensure a safe operation, it
is
absolutely necessary for the user to follow the safety
instructions and warning notes written in this user manual.
This device falls under protection-class I. Therefore it is essential that
the device should be earthed.
The electric connection must carry out by qualified person.
Summary of Contents for moviSpark Strobe
Page 1: ...1 USER MANUAL...
