Adding or replacing your wireless remote
1.
The included wireless remote is already pre-programmed. This setup is only needed when replacing an existing remote or by adding additional remotes to your
system. You may program up to 3 remotes to each control box.
2.
In order to program the remote to the control box you must turn the kit off.
a.
First Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
b.
Second Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
c.
Third Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the
remote.
Once you have installed your LED lighting kit, power the kit on using the 4 button wireless remote or the buttons located on the control box to
ensure that it is fully functional.
Using the Control Box & 4 Button Wireless Remote
Power Button
Pressing this button on the control box or wireless remote will turn your kit on and
off.
Speed Change Button
Pressing this button on the control box or
wireless remote will allow you to select from 5
different speeds for your selected pattern.
If your kit is in music mode, this button will
adjust the sensitivity of the selected music mode.
Mode Button
Pressing this button on the control box or wireless remote allows you to
change the current pattern displayed on your kit. There are 12 distinct
patterns, as well as 5 unique music modes. The patterns are listed below:
Solid Illumination Mode
Flashing Mode
Flashing Front Chase
Flashing Back Chase
Steady Front Chase
Steady Back Chase
Front Running Chase Mode
Back Running Chase Mode
Outside to Inside Flash
Inside to Outside Flash
Flash Pattern
Flash Pattern
(5) Sound Activation Modes
Color Change Button
This button is not used with LEDGlow’s Single
Color LED Underbody Kit.
For accessories, replacement parts and/or technical support please visit
for more information.