| 11
www.led2work.com
INROLED_50
DC
INROLED_50
RGB-W
6 | Maintenance and Care
The LED luminaire is maintenance-free. Do not make any alterations to the luminaire
(except according to the mounting information contained in this manual).
The luminants used in the luminaire have a very long life and cannot be replaced.
Turn off the light before cleaning and let it cool down completely. Clean the outside of
the luminaire with a soft, dry and clean cloth. To remove excess dirt, moisten the cloth
with water. Never use aggressive cleaning agents, as these may cause discolouration
of the housing.
No liability is assumed for damages resulting from the use of unsuit-
able cleaning agents.
7 | Warranty
We supply a full warranty for the product for 36 months from the date of purchase. This
warranty applies for fault-free working under proper use and in accordance with the
operating instructions.
During the warranty period defects and faults in the product will be rectified free of
charge if they are proven to be caused by material, processing or design errors. If the
purchaser complains of a material defect, he bears the burden of proof to demonstrate
that the product was already defective upon receipt.
The warranty does not extend to defects caused by wear, negligen-
ce or improper use.
Further claims, in particular claims for compensation for damage
that did not occur on the LED luminaire itself, are excluded.
The luminaire must be disposed of at a suitable
disposal site designated for recycling of electrical and
electronic equipment in accordance with local, nation-
al regulations. (WEEE-Nr. 32828318)
8 | Disposal
PIN assignment INROLED_50 Ecolab RGB-W
PIN 1 = 24V DC
LED colour:
green
PIN 2 = 24V DC
LED colour:
blue
PIN 3 = GND
PIN 4 = 24V DC
LED colour:
red
PIN 5
24V DC
LED colour:
white
Other colours can be displayed by
gating two or three pins simulta-
neously. Do not operate white light
colour simultaneously with the
colour light channels. Get in touch
with us for more information.
