LED World HUEDA H-2858Z4, Quick Start Manual

Page: 1 / 2

W R G B
4 1 2 3
S4 S1 S2 S3
W+
P
P
zone
scene
HUEDA™ RF Wireless RGBW/Dimmer Remote
1. Product Introduction:
Before you begin, read all warnings and installation instructions and save for future use.
1/2
Model: H-2858Z4
The HUEDA ™ RGBW and CCT control handheld
remote controller can control 4 different zones
wirelessly and has 4 color save buttons. You can
choose any color through color wheel. Color can be
selected through the color wheel. Requires 3 AAA
ALKALINE batteries(not included).
4. Product Specications:
Operation Voltage
Operation Frequency
Dimensions
4.5V DC (3 x AAA battery)
434 MHz / 868 MHz / 915 MHz
152.67L x 51.87W x19H mm (6.0 x 2.04 x 0.74 inch)
Transmitting Distance 50ft (15.2m) max (Line of sight, No walls)
2. Buttons Instructions:
Brightness control slider
Switch White Color variations
ON/OFF Device or Zones
4 zones button. Click to ON/OFF individual zone.
Press and hold to increase/decrease light intensity
of corresponding zone
Running button/Speed button
for running program
Red, Green, Blue and White color Control. Click
to ON/OFF corresponding channel. Press and
Hold to increase/decrease light intensity
Color save button
(press and hold to save
desired color)
Color wheel
Batteries (Back side)
3. Pair/Unpair Guide:
Pair : Press the learning button on HUEDA ™ RF Receiver, and then on HUEDA ™ Remote Controller press
the desired zone button and then change the color via color wheel on Remote. Connected LED light will
blink that confirms Pairing.
Unpair : Press the learning button on HUEDA ™ RF Receiver for about 3 seconds, then Connected LED light
will blink twice that confirms Unpairing.
Ÿ
Four zones/areas
Ÿ
Easy and User friendly interface
Ÿ
RGBW and CCT (Single Color LED Strip) Control
Ÿ
Paired by max 8 different remote controls
Program Setting: Click button, light on receiver will
flash once. Then touch the color wheel and choose
colors(max. 5 colors) and click P button again.
Light on receiver will flash again to confirm
programming
Recall program by 4 different
running mode(jump, flash, fade, strobe)
Operating Temperature 0 ° C~40 ° C (32 ° F~104 ° F)
Output RF signal
HUEDA LED
www.huedaled.com
HUEDA ™ LED | CALGARY, AB | CANADA
Copyright © 2017 HUEDA™ LED, A division of LED World Inc.. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).