LED World HH-SCOB 528-12 Series, Important Instructions

Page: 4 / 4

4/4
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY
Apply 1 ½” long electrical heat shrink over all connection points. Secure connection wire with wire clamp.
IMPORTANT !
Wrong!
0.78"
(20mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 12V power.
Tape light strip does not light
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
Confirm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
LEDs farthest from the power supply are noticeably dimmer
Ÿ
This is the result of voltage drop. Decrease the length of the 12V power feed or use thicker power feed wires between the 12V power supply
and the lighting strips.
Ÿ
Make sure your power supply is turned on and has the correct voltage.
LED Flex Strip lights blink on, then go off
IMPORTANT INSTRUCTIONS
1-800-387-4081
ledworldlighting.com ledworld.ca |
No Spot COB Lighting LED Flex Strip
8 Feet (Continuous 24 Watts)
Power Supply Max Feet of LED Flexstrips Power Supply Max Feet of LED Flexstrips
MD-012-300VTD52JV2
MD-012-060VTDHV2
16 Feet (Continuous 48 Watts)
MD-012-180VTD52JV2
3 X 16 Feet (Continuous 48 Watts
each channel)
MD-012-030VTDHV2
5 X 16 Feet (Continuous 48 Watts
each channel)
Copyright © 2022 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.3 08/22/22
Model : HH-SCOBX-528-12 (X = COLOR)