TOOLS REQUIRED
Cutter
RTV 108 Type silicone glue
INSTALLATION STEPS
Solder the wire
1
2
3
Use RTV 108 type silicon glue
to connect end
Complete connection
MOUNT NEO-FLEX STRIP INTO ALUMINUM CHANNEL/MOUNTING CLIP
Mounting clip comes with self-
lock bracket
1
2
3
4
Aluminum channel comes with
self-lock bracket
Place the self-locking bracket
into the strip
Push strip into Mounting
clip/Aluminium channel
IMPORTANT INSTRUCTIONS
TROUBLESHOOTING
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
Tape light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
LEDs farthest from the power supply are noticeably dimmer
Ÿ
This is the result of voltage drop. Decrease the length of the 24V power feed or use thicker power feed wires between the 24V power
supply and the lighting strips.
Ÿ
Have a electrician check all connections from the power supply to the LED Light Strips.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 24V power.
LED Flex Strip lights blink on, then go off
1-800-387-4081
ledworldlighting.com ledworld.ca
|
2/2
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 03/29/21
Architectural RGBW LED NEO-FLEX STRIP
Model
:
FC84M50-5M-24V-RGBW
