•
Do not use the device if
power adapter
has fallen into water or is damaged in
any way. Doing so could cause electric shock or result in injury. Please contact
Customer Service at 1(800)337-9565 if
power adapter
has been damaged in
any way.
•
Stop using device immediately if you think it is defective. Using a damaged
device could result in injury. Contact Customer Service at 1(800)337-9565.
•
Do not bend or abuse the wire of the
power adapter
as this can cause
electrical shock and problems.
•
Use only the supplied
power adapter
. Use of incorrect
power adapter
could
damage the device. Contact Customer Service at 1(800)337-9565.
•
Do not attempt to take the device or
power adapter
apart. Any modification or
attempted service will void the warranty.
•
Discontinue use and contact
C
ustomer
S
ervice if device overheats or becomes
uncomfortabl
y
hot to your skin.
•
Do not wear device while sleeping
, as cord can be a potential chocking
hazard
.
PRECAUTIONS
DISCLAIMER
This product is not intended to diagnose, cure or prevent any disease. LED Technologies,
Inc
.
makes no claims, representations or warranties regarding the ability of this product to
cure any physical, skin or mental condition. A qualified health professional should be
consulted with regards to any condition requiring medical attention.
dpl
®
Eye Mask
T
his is a light emitting diode (LED) device that emits energy for use in pain relief,
penetrating deep into the skin to ease and repair damaged tissue. The device delivers
natural light energy in the Infrared and Red spectrum. There are no user settings or
adjustments.
TROUBLESHOOTING
1.
System not turning on:
•
Is power
adapter
pushed firmly into outlet?
•
Try a different wall outlet to confirm power is available.
•
Is
USB
power cord pushed firmly into
power adapter
?
•
Is On/Off button turned on?
•
If device still doesn't turn on, call Customer Service at 1(800)337-9565
2.
System shuts off abruptly prior to
completion of
20 minute
treatment
:
•
System
is designed to shut off automatically after 20 minutes.
.
•
System may shut off automatically after multiple repeated uses if the
device exceeds desired temperature. Allow device to cool for several
minutes and try again.
•
If the device continues to shut off prior to
20
minutes, please contact
Customer Service at 1(800)337-9565
.
3.
Some lights appear not to be on:
•
The Infrared (IR) light spectrum is not visible to the human eye. These
lights will look as if they are not on, but are operating properly. If
R
ed
lights are on, the device is operating as designed.
•
Power Adapter
The dpl® Eye Mask is intended for the temporary relaxation of muscles, relief of
pain associated with migraines, headaches, sinus pressure, and temporal
muscle tension, and to increase local blood circulation.
SYSTEM INCLUDES
•
dpl
®
Eye Mask
pain relief
device
•
USB Power Adapter
•
User Guide
ASSEMBLY INSTRUCTIONS
1.
Insert USB plug from
device
into provided USB power adapter.
2.
Plug power adapter into electrical outlet.
3.
Place dpl® Eye Mask over the treatment area and secure straps.
4.
Press On/Off switch to turn
O
n and
O
ff.
LIGHT SENSITIVITY TEST
Test yourself for light sensitivity prior to initial treatment:
1. Power on your device.
2. Place device on or within 1/4" of the skin on your forearm for three minutes.
3. After 3 minutes check the area. If area has turned red and lasts for more than 2
hours your skin is light sensitive.
4. Discontinue use and contact customer service.
OPERATING INSTRUCTIONS
MAINTENANCE & CLEANING
Maintenance:
1.
This is a medical device. It is important to keep it clean.
2.
There are no user serviceable parts in device.
3.
Device includes only an On/Off switch. All settings are set at the factory.
4.
Use only supplied power
adapter
.
Cleaning:
1.
Turn device off and unplug from any power source.
2. Lay device flat with lights facing up.
3. Wipe the device surface with alcohol wipes or damp cloth to remove any
residue from skin oils.
.
4.
Allow to dry completely before using
.
PRODUCT REPRESENTATION
LED Technologies, Inc. is constantly improving its products with the latest technology.
As a result, the actual product may differ from the product shown in images on the
packaging and in this user guide.
CONTRAINDICATIONS
•
Contact your Doctor prior to using the device if you are or suspect you are taking
drugs known to cause light sensitivity.
•
Do not use this device if your skin is light sensitive or you are currently using
medication that may cause skin sensitivity to light.
Doing so may result in
photosensitive reaction.
•
Discontinue use immediately if you experienced any sensitivity to using this
device.
WARNINGS
•
Do not operate device where it could come into contact with water. Doing so could
cause an electric shock or result in injury.
3
2
4
5
•
Always unplug
power adapter
from wall outlet when not in use.
•
Do not use this device on infants or young children
without physician approval
.
•
This product contains neoprene. If you have or suspect you have al
l
ergies to
neoprene, consult your Doctor prior to use.
•
Contact your Doctor if you have any medical questions regarding use of this
device.
•
Contact your Doctor prior to using if you:
o
Are pregnant or suspect you may be pregnant.
o
Have suspicious or cancerous lesions.
1.
Insert USB plug from
device
into provide
d
USB power adapter.
2.
Plug power adapter into electrical outlet.
3.
Place dpl® Eye Mask over the treatment area and
secure straps.
4.
Press On/Off switch to the on position to start device.
5.
Leave
device over the treatment area for
15-20 minutes.
6.
Move On/Off switch to the off position to stop device.
7.
Device will auto shut off after completion of 20 minute treatment.
8.
Device may be used multiple times per day.
TRAVELING WITH DEVICE OUTSIDE USA
Power
adapter
is
designed for USA standard 120V power outlets. When traveling
outside the USA, you will need to check the local power requirements and use the
appropriate
power adapter and/or converter.
CUSTOMER SERVICE
You can reach Customer Service by calling 1(800)337-9565, Monday-Friday,
8:00AM-4:
3
0PM, Mountain Standard Time. Customer Service can also be reached by
email at [email protected].
REPLACEMENT PAR
TS
The following list or damaged parts can be purchased as replacement items directly
from LED Technologies, Inc. by calling Customer Service at 1(800)337-9565.
