GB
www.led-pol.com
INSTALLATION GUIDE
Bulkhead light fixture
Please, read and understand this instruction manual before installing the light fixture.
The installation should be performer by an adequately qualified person.
1. Prior to installation, make sure that the power supply is disconnected by turning the main switch off.
2. Drill holes in the installation area. The diameter of the holes should be compatible with expansion bolts.
Insert the expansion bolts into the holes.
3. Connect power supply cables to the fixture. The use of copper wires size 1.5mm
2
or thicker is recommended.
4. The product is polarisation-sensitive, make sure that the connection is done properly: L – Line (brown wire),
N – Neutral (blue wire)
5. Remove the top part of the housing from the fixture. Mount the fixture to the installation surface by screwing bolts
into the pre-drilled holes.
6. Mount the top part of the housing back onto the fixture.
7. Turn the power supply back on
.
Pursuant to the WEEE regulation of 29th July 2005, products labelled with the symbol of a crossed waste bin cannot be disposed with other waste.
In order to dispose electric and electronic waste, the user is obliged to deliver it to a special collection centre. The product does not contain any
hazardous substances likely to cause adverse effects on the environment or human health.
LED-POL Spółka z ograniczoną odpowiedzialnością Sp. k.
ul Kustronia 40, 43-300 Bielsko-Biała
tel.: +48 33 822 63 00, e-mail: [email protected]
ORO-SFERIS-40
W-DW-L
This luminaire
contains built-in
LED lamps.
The lamps cannot be changed
in the luminaire.
ORO-KOS
-15W-DW-SM
ORO-SFERIS-40
W-DW-L
This luminaire
contains built-in
LED lamps.
The lamps cannot be changed
in the luminaire.
ORO-KOS
-15W-DW
ORO-KOS-15W-DW
INDEX: ORO27002
ORO-KOS-15W-DW-SM
INDEX: ORO27004
