3) INSTALLING AND USING THE DEVICE
The device is intended for outdoor lighting. The device is not intended for any other
purposes. Follow the instructions in this user manual to make sure the device is
installed and used safely. The device is intended for private use only.
Open the packaging carefully before taking out the device. Make sure it is complete
and undamaged. If any components are missing or damaged, contact the vendor and
do not use the product. Retain the packaging or recycle it in accordance with local
regulations.
Mounting the device:
The device can be mounted on a ‘flat’ surface.
To mount the device, drill a hole at the marked position of the bracket and push
the mounting plugs into the drilled holes.
Then use the screws to assemble the bracket and slide the device over the mounted
bracket.
Prior to initial use, please expose the device solar panel to direct sunlight for at
least 8 hours, with the power button switched “ON”, so that the battery is fully
charged. You can check if the power button is correctly switched “ON” by covering
the solar panel and seeing whether the LEDs light up .
B
B
E
C
A
EN 03
