LECTURER LTC-S2007, User Manual, Page: 16 / 36

10
MAIN MENU
PTZ & MENU
MENU: Click MENU to enter menu, refer to
menu settings to change the tracking
camera's parameters. Click MENU again to
exit menu.
Note: The parameters in the menu have been
adjusted to have the best tracking
performance when leaving factory, for general
user, there is no need to change the
parameters.
White Balance
White balance mode, two options: Auto WB,
one push WB.
Auto WB : The camera can automatically
adjust white balance (WB) according to the
alteration of background lightness to give a
true color image. Auto WB can be used for
general use.
One push WB : When the color of the video is
obviously incorrect, you can enable one push
trigger WB for color correction.
Operation of One push WB :
1. Have a person hold a A4 white paper, make
sure the paper is pointing directly to the
tracking camera.
2. Adjust the camera
’s Pan / Tilt / Zoom until
the paper is able to cover the whole image
without finger or other objects.
3. Choose one push WB option, after waiting
for ten seconds when the image has been
adjusted, move away the paper.
SYSTEM SET
Firmware Upgrade: Used to upgrade
firmware. Restart Device: press RESTART
DEVICE , the camera will run a calibration
procedure and reboot.
TRACKING SETTING
START TRACK: When the camera stops
tracking, press START TRACK to activate
tracking (call preset 80 can also activate
tracking).