SPECIFICATIONS AND FEATURES
Operating frequencies:
UM195:
470 to 608 MHz
RF Power output:
UM195:
100 mW (nominal)
Pilot tone:
32.768 kHz (
±
2Hz); 5kHz deviation
Frequency stability:
±
.002%
Deviation:
±
75 kHz (max)
Spurious radiation:
50 dB below carrier
Equivalent input noise:
-126 dBV
Input level:
Nominal 2 mV to 300 mV, before limiting.
Greater than 50 Volts maximum, with limiting.
Input impedance:
Taps provided for 500, 1k, 10k Ohm
Input compressor:
Soft compressor, >40 dB range
Gain control range:
43 dB; semi-log rotary control
Modulation indicators:
Dual LEDs indicate modulation level 12 dB below limiting and at
the onset of limiting.
Controls:
3 position "OFF-MUTE-ON" slide switch for noiseless turn
on/turn off operation. Front panel knob adjusts audio gain.
Audio Input Jack:
Switchcraft 5 pin locking (TA5F)
Antenna:
UM195:
Detachable, flexible wire supplied. 50 Ohm port allows
connection to test equipment.
Battery:
Precision compartment auto-adjusts to accept any known
alkaline 9 Volt battery. (We’ve tried 108 different ones!)
Battery Life:
UM195:
7.5 Hours with alkaline 9 Volt
Weight:
6.3 ozs. including battery
Dimensions:
3.1 x 2.4 x .75 inches
Emission Designator:
UM195:
200KF3E
10
Summary of Contents for UM195
Page 2: ......
