UHF Digital Hybrid Wireless
®
Rio Rancho, NM
9
Installing the SRBATTSLED
Orient the battery sled so that the PCB connectors will
mate when the sled is inserted.
PCB
connectors
Slide the battery sled adapter into the end of the SR
and gently seat it into place with the rear panel flush
with the housing.
Install and tighten the two side panel and two top panel
screws as indicated by the arrows.
Spare
screw
Battery retaining clips.
Battery Life
• The SR receiver operating time with a NP-F570
slim L series battery at full charge is approximately
12 hours.
• Battery life with two Energizer 9 volt alkaline batter-
ies in the optional adapter is approximately 5 hours.
• Two LiPolymer 9 volt rechargeable batteries will op-
erate the SR for approximately 6 hours. The operat-
ing time will typically decrease over the useful life of
a rechargeable battery.
Battery Adapters
Battery sled adapters configure the receiver for stand-
alone use or to provide battery backup power. Several
options are available:
• SRBATTSLEDTOP
• SRBATTSLEDBOTTOM
• SR9VBP (inserts into the SLED adapters)
SRBATTSLEDTOP
SRBATTSLEDBOTTOM
The battery sled adapters accept L and M type video
camera rechargeable batteries and the optional
SR9VBP 9 volt battery case.
L or M type video
camera batteries
mount directly onto
the battery sled
SR9VBP
battery
case for
two 9 volt
batteries
The battery sled adapters do not include charging
circuitry. Batteries must be charged with their respective
chargers. The adapters include an integral circuit that
automatically selects between the battery and the exter-
nal source, whichever delivers the highest voltage.
