Lectrosonics SPNTrio, Installation And Setup, Page: 21 / 36

Installation and Startup Guide
Rio Rancho, NM
21
After selecting the mode and/or changing the passcode,
select SAVE with the rotary control and press the center
switch to save the settings.
A progress bar
will appear as the
settings are saved.
Press the LEFT (9:00 o’clock) button to return to the
previous screen.
Master Reset
Hold the LEFT and UP buttons in at power up to restore
factory default settings.
WARNING: Master Reset will remove all stored
settings, unlock the control panel and reset the
passcode to five center button presses.
Master Reset takes about 75 seconds to complete
while the Alert LED on the front panel glows white. The
display will then return to the Main Window and the
right (blue) LED will light up to indicate power ON and a
“ready” status.
Input Settings
Select [INP] on the Main Window.
Select from scrollable list of setup parameters.
EXAMPLE: Mic/Line Input Setup
accesses a setup
screen where gain values, phantom power and polarity
(phase) can be adjusted.
Mic/Line Input Setup - Submenu
Matrix Crosspoint Setup
Select [MAT] on the Main Window.
Scroll to the desired Crosspoint setting and select it.
The UP and DOWN buttons can also be used to scroll
the menu items.
Adjust to the desired value with the rotary control and
press the control to store the value. (the Crosspoint
Gain setting screen is shown here as an example)
Output Settings