DSW Digital Wireless System
Rio Rancho, NM
9
Navigating the Menus
From the Main Window, press the encoder to open the
menu select screen.
Lower bar describes the highlighted menu
Top bar lists active menu
The menu selections includes links to the RX and TX
menus and system level choices. Rotate the encoder
to select the desired item.
The example shown below is for the SMART NR menu
item. The navigation is the same for all menu items.
The icon in the center of the LCD, highlighted in blue,
is the active (selected) menu item.
Press the encoder to enter the setup screen.
Top bar shows currently selected menu
Lower bar describes the selected menu item
Since there are up to six channels in the receiver, the
channel must be selected before entering the setup
screen. After the menu item is selected, as shown
above, press the encoder to move to the the next
screen, which allows you to navigate to the desired
channel. The selected channel appears on top of the
graphical “stack” in the display.
Active menu
Selected
channel
Menu title
Enter setup
screen
markers
indicate selected
function
The “stack”
of available
channels
Rotate the encoder to select the “CHOOSE” item in the
lower bar (markers indicate active selection). Press the
encoder to highlight the item.
Once the icon is highlighted, rotate the encoder to
scroll through the available channels. The rectangular
icon will move to indicate the selected channel.
Rectangular icon will indicate the selected channel
After the desired channel is selected, press the en-
coder to remove the highlight, then rotate it to select
EDIT (markers indicate the selected item) and press
the encoder to highlight the item and enter the setup
screen to make changes.
EDIT item highlighted when
setup screen is active
When the EDIT item is highlighted, the setup screen
for the selected channel will be active. Rotate the
encoder to the desired setting that appears inside the
rectangular area (NORMAL in this illustration), then
press the BACK button on the panel to store the set-
ting and leave the setup screen.
Press the BACK button again to return to the menu.
Press it once or twice again to return the previous
menu or the main window that displays a summary of
all channels.
NOTE: Refer to the menu map on the following
pages for an overview of the menus.