manualshive.com logo in svg

Lectronix Navion R5000, Operating Instructions Manual

Share
Download
Lectronix Navion R5000 Operating Instructions Manual Download Page 30

INFO 

 

 

24

 Vehicle Status (Status) 

The R5000 Vehicle Status display provides information about the operating conditions of the 
vehicle.  The following table describes the information available in the status screens. 

Screen 

Status Description 

Road 

Traveling information such as road speed, fuel economy, fuel 
level, average fuel economy, total fuel used, instantaneous fuel 
rate and total vehicle distance is found here. 

Engine 

View engine RPM, oil temperature and pressure, coolant 
temperature and pressure and transmission oil temperature and 
pressure in this screen. 

Electrical 

Battery voltage and alternator status are available in this screen. 

Environment 

Interior and Exterior temperature as well as Barometric pressure 
and Heading can be viewed in this screen. 

Miscellaneous 

Washer Fluid Level and Engine Load can be viewed in this 
screen. 

Tire Pressure 

The pressure of the vehicle tires is displayed. This requires the 
optional Tire Pressure Sensors. 

Note:

 The type and availability of status and alarm information is dependant on the make and 

model of the recreational vehicle. 

Vehicle Status Buttons & Controls 

 

Summary of Contents for Navion R5000






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands