SB1001: Service Bulletin
Release: 3 Jan 2007
By:
Bruce Jones
581 Laser Road
Rio Rancho, NM, 87124
(505) 892-4501
web: www.lectrosonics.com
Sales: [email protected]
Service: [email protected]
Long Ranger Battery Pack Update
NOTE: IF YOUR LONG RANGER HAS A
TELESCOPING ANTENNA, THIS UPDATE MUST
BE DONE AT THE FACTORY.
To remove the old battery pack remove the
screws in front of the battery and the screw on
the rear upright panel of the chassis.
CAUTION
Do not short
the battery
terminals to
the screws or
chassis while
removing the
battery pack.
Remove the battery assembly and cut the wires
as close as possible to the negative and positive
battery terminals (leaving the wires as long as
possible).
LRIII-MB
LRIII-MB0R
Replace this
battery pack
with this one.
1.
2.
NOTE: DISPOSE OF OLD BATTERIES PROPERLY.
CHECK FOR LOCAL RECYCLER OR RETURN TO
THE FACTORY
DANGER:
RISK OF SEVERE INJURY
Wires connecting the battery must be placed
for correct polarity! If you are not 100% certain,
contact the factory before proceeding.
Wear safety glasses and use extreme caution to
prevent battery terminals from being shorted.
If the batteries become warm to the touch,
disconnect all battery terminals IMMEDIATELY
and contact the factory.
CAUTION:
Replace battery only with Lectrosonics Part No.
“LRIIIBATT”. Due to the fast charge circuitry,
you must use this specific battery. Any other
battery will quickly fail.
Included with LRIII-MB0R
replacement battery
Summary of Contents for Long Ranger LRIII-MB
Page 4: ...Filename M LRIII MB0R ...
