Digital Belt-Pack Transmitter
Rio Rancho, NM
5
Features and Functions
Belt Clips
The wire belt clip may be removed by pulling the ends
out of the holes in the sides of the case. Be sure to have
a firm grip to avoid scratching the surface of the housing.
An optional spring-loaded, hinged belt clip (model num-
ber BCSLEBN) is also available. This clip is attached by
removing the plastic hole cap on the back of the housing
and mounting the clip with the supplied screw.
IR (infrared) Port
The IR port is available on the top of the transmitter for
quick setup using a receiver with this function available.
IR Sync will transfer the settings for frequency from the
receiver to the transmitter.
PWR/FUNC
AUDIO
-20
-10
IR PORT
u
470.100
-40
-20
+0
DBu
USB Port
Belt clip
mounting hole
Modulation
Indicators*
Programmable
Function Switch
Audio
Input
Jack
Antenna
Port
Belt clip
mounting hole
Battery
status LED
Full access to all settings is provided through the keypad
and LCD. The transmitter can also be configured as a
“one button” device by locking the ability to make chang-
es with the keypad, and configuring the top panel switch
as power on/off.
Battery
compartment
door
Key verification
LED
Menu navigation
buttons
Power button
Return to
previous screen
IR Port
Remove hole cap to
attach spring loaded
belt clip
When the transmitter is set to MUTE, the -10 Modu-
lation Indicators LED will glow solid red. Otherwise,
the -10 and -20 Modulation Indicators LED will glow
light green or red depending on modulation levels.
The Key verification LED will glow solid blue if the
key is set to Universal or if an encryption key is
stored in the unit when set to Standard, Shared or
Volatile key policies. The blue LED will blink when in
these key modes and no key is stored.
*
**
