Section 3a
– OPERATION
Key Features – continued
8
The
MENU Button
allows you to enter the programming and monitoring functions
.
Use
UP/DOWN ARROW
and
SELECT
to scroll through the Main menu and Sub-menu:
Main Menu
1.0
Test Lectranator Digital Model DIG 48
2.0
Owner Options
3.0
Maintenance Menu
4.0
Installer Menu
5.0
Exit Menu Mode
SUB-MENUS
1.0
TEST Lectranator Digital Model DIG 48
The display will automatically cycle through this program, then return to normal operation. The display shows as follows:
1.1
Salt
in grams per liter (gm/l) or parts per million (PPM)
1.2
Add Salt
indicates the amount of salt needed to add to establish 3.0 gm/l (3000 ppm) based upon pool volume
1.3
Temperature
in Celsius or Fahrenheit.
1.4
Cell Volts
and
Amps
2.0
OWNER OPTIONS
Use
UP/DOWN ARROW
and
SELECT
to scroll through the sub-menu. After completing a step, it displays the next step:
2.1
English
/
Metric
: displays volume in gallons or cubic meters; salt additions in lbs or kg;
Back – Main Menu
(2.0)
2.2
Te mperature Units
: displays the water temperature in
Fahrenheit
or
Celsius
;
Back - Main Menu
(2.0)
2.3
12/24-hour Time
: displays the current time in
12-hour Time
or
24-hour Time
units;
Back – Main Menu
(2.0)
2.4
Set Time of Day
: sets the time as follows:
Set Hours
;
Set Minutes
2.5
*
Pump Program 1
: allows you to program the pump on/off cycle through the on-board program
2.6
*
Pump Program 2
: allows you to program a secondary pump on/off cycle through the on-board program
*
Only applicable with
Pump Config.
(4.6) selection of
One-Speed Pump
or
Two-Speed Pump
*
Pump Program 1 or 2 will show the previous time set. Otherwise,
Not Programmed
will display,
then automatically step to display
-Prog.
-Delete SELECT-No Change
Selecting
-Prog
steps to
Pump ON at Set Hours “12”:00 P; Pump ON at Set Mins 12:“00” P
then
Pump OFF at Set Hours “12”:00 P; Pump OFF at Set Mins 12:“00” P
2.7
Back – Main Menu
(returns to MAIN MENU)
Lectranator Digital
Model DIG 48
S a n i t i z e r
100%
12:00P
80F
ON
Check
System
Boost
Menu
Select
Pump
