EXTERNAL DC ADAPTER User’s Manual
Operating Procedures
To use this product, follow the steps below.
(a) Mounting the DC Adapter on the Oscilloscope
1. Place the rear sides of the DC adapter and the WaveSurfer
oscilloscope so that they face each other. Align the upper and
lower lugs on the left side of the adapter (viewed from the rear
side of the oscilloscope) with the lug holes, and then insert the
lugs into the holes by sliding the adapter leftward.
Rear of WaveSurfer
oscilloscope
DC adapter
Lugs (upper and lower)
Figure 4 Mounting the DC Adapter A (Left Side)
2. Then align the upper and lower lugs on the right side of the
adapter (viewed from the rear side of the oscilloscope) with the
lug holes and insert them into the holes. (See Figure 5 below.)
Lugs
Figure 5 Mounting the DC Adapter B (Right Side)
9
