LeCroy USB Mobile HS User Manual Download Page 71

Page: 71 / 154

USB

MobileHS

User Manual

Chapter 6: Searching Traces

LeCroy Corporation

Step 4

Select one of the following options:

•

Union:

Find all packets matching ANY of the specified events.

•

Intersection:

Find packets matching ALL of the specified events.

•

Exclusion:

Exclude packets matching any of the specified events.

Exclusion

works with the other two options: Select

Union

AND

Exclusion

(=Exclude

packets with ANY of the following fields) or

Intersection

AND

Exclusion

(=Exclude packets with ALL of the following fields.)

Step 5

If desired, set the search

Direction

and

Origin

Step 6

Click

After the search finishes, the program displays the packets meeting the search criteria.

6.6 Find Next

To apply the previous

Find

parameters to the next search:

•

Select

Find Next

under

Search

on the Menu Bar

•

Click

on the Tool Bar.

6.7 Search Direction

Toggles the search forward or backwards. The current direction is indicated in the menu.

Summary of Contents for USB Mobile HS



























































































































































Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands

LeCroy USB Mobile HS, User Manual

Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands