LeCroy USB Mobile HS User Manual Download Page 133

Page: 133 / 154

USB

MobileHS

User Manual

Chapter 11: Updates

LeCroy Corporation

125

Chapter 11: Updates

From time to time as modifications are made to the USB

Mobile

HS™ Hi-Speed USB

Analyzer, it is necessary to update the Analyzer for optimal performance.

11.1 Software, Driver, and BusEngine Revisions

The

Readme.txt

file on the first installation disk and in the installed directory gives

last-minute updates about the current release.

Once the Analyzer has completed the self diagnostics and is connected to the PC, you
can check the latest revision of the software and BusEngine™ by selecting

About

USBMobile

…

from the

Help

menu.

About USBMobile

HS details revisions of the following software and hardware:

•

USB

Mobile

HS Software Version

•

USB

Mobile

HS Driver Version

•

BusEngine Version

•

Unit Serial Number

Note:

When contacting LeCroy for technical support, please have available all the
revisions reported in the

About USB USBMobile

HS window.

Summary of Contents for USB Mobile HS



























































































































































Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands

LeCroy USB Mobile HS, User Manual

Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands