LeCroy Corporation
Software Settings
256
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
Color Setting
Based
on
Cell
Type
: Each column has its own color.
Based
on
Port
No.
: Data of each row are shown based on the specified color for its port.
You can set the color of ports in the Viewer settings.
Based
on
Read/Write
Command
Type
: You can specify a color for Read commands,
another color for Write commands, and other color for other commands. The software
shows each row based on the command type: Read, Write, or others.
Based
on
Specific
Command
Type
: You can specify a color for each command. The
software applies the setting on the Command column.
Anchor the Selection bar
You can anchor the selection bar of the Spreadsheet View.
Set
the
Anchor
row
as
sync.
point
: Other views synchronize based on the contents of the
anchor row.
Other
Repeat
decoded
command
in
frame
column
: The spreadsheet shows the name of the
command in front of all frames in the Command column. Otherwise, it will show the
name of the command only in front of the SSP command frame.
Decode
CDB
of
Commands
: The spreadsheet shows name of command in command
column, otherwise shows CDB of command in command column.
Show
‘Sector
Count’
instead
of
‘Xfer
Length’
(SATA only): Display sector count.