LeCroy Advisor, User Manual

Page: 43 / 174

USB Advisor User Manual Chapter 5: Software Overview
LeCroy Corporation
35
The Progress Bar fills with color in proportion to the specified size and actual rate at which
the hardware is writing and reading the recording memory. However, the Progress
Indicator is normalized to fill the space within the Status Bar.
Recording Status
During recording, the current Recording Status is displayed in the next segment. When
you activate the
Record function, this segment flashes one of the following messages
(depending on the selected Recording Options):
• Trigger?
• Triggered!
• Uploading
After recording stops:
• The flashing message changes to Uploading data– x % done ( x% indicates
the percentage completion of the data uploading process).
• The traffic data is copied to disk (overwriting any previous version of this file)
using the default file name
data.usb . If two channels of traffic are recorded,
Advisor creates two files: data.usb and data_classic.usb . You can specify a
file name in the Recording Options dialog box.
To abort the upload process:
• Press Esc on your keyboard
OR
• Again click in the Tool Bar.
Note: While uploading is in progress, clicking the stop button again brings up a dialog
opens a dialog that allows you to do a partial upload, flush the current file, keep what has
uploaded at this point, and to continue uploading.
You are asked if you want to keep or discard the partially uploaded data.
When the data is saved, the Recorded Data file appears in the main display window and
the Recording Status window is cleared.
• If the recording resulted from a Trigger Event, the first packet following the
Trigger (or the packet that caused the Trigger) is initially positioned second
from the top of the display.
• If the recording did not result from a Trigger Event, the display begins with the
first packet in the traffic file.