Leckey Squiggles+ User Manual Download Page 27

Sq Stander User Manual      p.27 

11.0 Cleaning & Care Information 

How to Maintain 

When cleaning we recommend that you use  

only warm water and a non-abrasive detergent.  

Never use organic solvents or dry cleaning fluids. 

Upholstery and fabrics 

1.  The upholstery and fabrics can be cleaned by hand whilst 

in place. When cleaning we recommend that you use only 

warm water and a non-abrasive detergent. 

2. The best cleaning method is a ‘wipe & dry’ technique. 
3.  Staining should be removed as quickly as possible with 

absorbent cloth, towels or a sponge. Routine soap and 

warm water sponging is effective for ordinary soiling and 

minor spills. Be careful not to over wet the fabric as this  

will cause the staining to spread. 

4.  Antiseptic cleaning agents can be used on more stubborn 

stains. These may require a safe solvent such as Isopropyl 

Alcohol or Mineral Spirit. A half cup of household bleach to 

5 litres of water can also be used as a useful disinfectant. 

5. Always ensure the product is dry before use. 

Metal and plastic components 

1.  Soap and water or antibacterial spray can be used  

for daily cleaning. 

2. For deep cleaning a low pressure steam cleaner can be used. 
3. Do not use solvents to clean plastic or metal components.
4. Make sure the product is dry before use.

Summary of Contents for Squiggles+

































Reviews: